TecnoGlobe Pre-Wired Motorcycle Relay Kit – safe and waterproof power supply

The TecnoGlobe pre-wired relay kit is the ideal solution to power high-demand electrical accessories (extra lights, LED spotlights, auxiliary equipment…), while protecting your motorcycle’s original wiring harness.

Perfect for BMW motorcycles and CANBUS multiplexed systems.

This relay kit allows you to install additional lighting or other accessories without dashboard error codes and without disturbing the sensitive electronics of modern bikes.

Pre-wired relay kit: a reliable base for a clean installation.

Unlike a relay sold alone, this pre-wired kit includes a waterproof relay mounted in a holder, with a 5-wire harness already prepared. It is a solid base for building a safe wiring setup adapted to your configuration.

Designed for harsh weather and outdoor motorcycle use.

The relay, holder and waterproof connector are built to withstand rain, moisture, and intensive riding conditions, greatly reducing the risk of short circuits.

Special relay kit for CANBUS / multiplexed motorcycles.

This TecnoGlobe relay kit is recommended for BMW Motorrad, KTM, Ducati, Guzzi and other CANBUS-equipped motorcycles or quads, to avoid electrical faults.

Waterproof pre-wired relay kit 12VDC 30A/40A – 5 Pin SPDT Bosch type – 16AWG / 14AWG wires

Technical features of the TecnoGlobe relay kit:

• Waterproof relay and relay holder – 12V DC (max. 14V) Bosch type SPDT 5-pin relay.

NOTE: 12V and 14V refer to coil voltage, not the minimum activation voltage.

• Heavy-duty 16/14 AWG wiring:

Black – Ground 16AWG (85)

Red – Power supply 14AWG (30)

White – Trigger / control 16AWG (86)

Yellow – Output N/C 14AWG (87a)

Blue – Output N/O 14AWG (87)

• High switching capacity 40/30A – Maximum contact capacity: 40A normally open, 30A normally closed (14V DC).

Automotive standards: suitable for headlights, fog lights, fans, starters, auxiliary systems, etc.

• Excellent waterproof performance, high quality in all weather conditions.

• Easy wiring: color-coded wires and metal mounting tab for quick installation.

Pre-wired relay kit includes:

• Waterproof 5-pin relay + relay holder

• Pre-wired 5-wire harness with waterproof connector

• Color-coded wire outputs for easier installation

• Integrated metal mounting bracket

Specifications:

• Coil voltage: 12VDC

• Coil current: 160 mA

• Switching voltage: max. 14VDC

• Switching capacity: 40A / 30A

• Wiring: 14 AWG and 16 AWG

Current contact rating:

- NO 40A 14V DC

- NC 30A 14V DC

Ambient temperature: -40 ~ +125°C (non-condensing)

Important note:

Very easy to install, but this motorcycle relay kit still requires basic electrical knowledge. Final wiring depends on your setup (switch, battery, lights, accessories). If in doubt, please ask a professional installer.